Ties (12 Twine / Ties)
6" Looped Steel Poly Coated Wire Ties are a simple, dependable way to secure, bundle and close a wide range of items where you want the strength of steel wire with the added protection of a polymer coating. The looped ends make them quick to thread and twist by hand, helping you create a neat, consistent closure without specialist tools. These ties are commonly used for general bundling, light-duty securing and packaging tasks where a reusable, adjustable tie is preferred over single-use tape or plastic cable ties.
Key Features
Looped ends for fast handling:
The pre-formed loops make it easy to feed one end through the other and start twisting immediately, even when wearing gloves.
Steel wire core:
A steel wire centre provides the holding strength needed for everyday bundling and securing tasks.
Poly coated finish:
The polymer coating helps reduce the risk of scratching or marking on the items being tied, and can improve grip during twisting.
Adjustable and re-twistable:
Unlike many one-time closures, looped wire ties can often be loosened and re-tightened for temporary holds, rework, or inspection points.
Neat, low-profile closure:
When twisted down, the tie sits close to the bundle, helping keep packs tidy and reducing snag points during handling.
- Looped design for quick threading and twisting
- Steel wire strength with a protective poly coating
- Suitable for bundling, securing and general packaging tasks
- Helps protect surfaces compared with uncoated wire
- Simple hand application—no specialist equipment required
Typical Uses
- Bundling: grouping cables, hoses, small components, or lightweight products for storage and dispatch
- Bag and sack closure: temporary closing of poly bags, liners, and sacks where a twist closure is suitable
- Warehouse and workshop organisation: keeping parts together, tagging bundles, or securing items to pallets and stillages (light duty)
- Retail and presentation: tidy bundling of products where a discreet tie is preferred
- General purpose fastening: quick, adjustable securing for day-to-day tasks
6" Looped Steel Poly Coated Wire Ties — Full Product Guide
Looped wire ties are a long-established, practical fastening method used across packing benches, warehouses and workshops. This product combines a steel wire core with a poly coating and a looped-end format designed for speed and ease of use. The result is a tie that is straightforward to apply, provides a secure hold for many common bundling tasks, and helps reduce surface marking compared with bare wire.
How It Works
Each tie has a loop at both ends. To use, bring the tie around the item or bundle, pass one loop through the other, pull to the desired tightness, then twist the free end to lock the tie in place. The twist creates friction and mechanical resistance that helps prevent loosening during normal handling. Because the closure is formed by twisting rather than a fixed ratchet, you can typically fine-tune the tightness and position as you work.
For best results, aim for a firm, even tension and a tidy twist. Over-twisting can make removal harder and may increase the chance of wire fatigue over repeated re-use. If you need a temporary hold, use fewer twists so the tie can be undone more easily.
Materials and Construction
Steel wire core: provides the primary strength and holding power. Steel wire ties are valued for their ability to maintain tension and resist stretching in typical bundling applications.
Poly coating: the coating acts as a protective layer between the wire and the item being secured. This can help reduce abrasion and scratching on surfaces, and can also make the tie more comfortable to handle. The coating may also help the twist “bite” and stay in place by increasing grip.
Looped ends: the pre-formed loops are designed for quick threading and consistent application. This format is especially useful when you need to apply multiple ties quickly or when you want a closure that is easy to start without fiddling with sharp wire ends.
Floor Type Compatibility
This product is a packaging and bundling accessory rather than a flooring product, so floor compatibility is not applicable. However, it is well suited to use in a wide range of environments such as packing stations, warehouses, workshops and retail backrooms.
Health and Safety
- Hand protection: while the poly coating can improve handling comfort, consider gloves when applying ties repeatedly or when working around sharp-edged items.
- Avoid sharp twist ends: after twisting, tuck the twisted tail down against the bundle where possible to reduce snagging and scratching.
- Do not use for lifting: looped wire ties are intended for bundling and securing items, not for load-bearing lifting or safety-critical restraint.
- Check suitability: if you are securing delicate finishes, test on a small area first to confirm the coating provides the protection you need.
Ideal Applications and Use Cases
These looped, poly coated wire ties are a strong choice when you want a fast, adjustable closure that looks neat and holds reliably for everyday tasks. Common scenarios include:
- Dispatch and fulfilment: bundling items together to prevent separation in transit
- Production and kitting: keeping component sets together before assembly
- Maintenance and facilities: temporary securing of hoses, leads, or protective sheeting (non-critical)
- Retail prep: bundling products for display or back-of-house organisation
- General packaging: closing bags or securing protective wraps where a twist tie is appropriate
Maintenance, Cleaning and Care
Wire ties are generally low maintenance. Store them in a clean, dry area to keep them ready for use and to help preserve the coating. If ties are reused, inspect them for kinks, damaged coating, or signs of fatigue at the twist point. Discard ties that show significant wear or exposed wire where surface protection is important.
Case Study
Scenario: A small fulfilment team needs a quick way to keep multi-part orders together during picking and packing without adding bulky packaging.
Approach: Items are grouped and secured with looped poly coated wire ties at the packing bench. The looped ends speed up application, and the coating helps reduce marking on product surfaces.
Outcome: Packs remain tidy through handling and staging, and the team can adjust or remove ties easily if an order needs checking before dispatch.
Who is it for?
- Warehouses and fulfilment operations needing fast, tidy bundling
- Workshops and maintenance teams wanting an adjustable general-purpose tie
- Retail and e-commerce packers looking for a simple closure method
- Anyone who prefers a steel-wire hold with a protective coating
Colours / Features Available
This listing is for looped steel wire ties with a poly coating. Coating colour and other variant features may vary by option—please refer to the variant selection on this page for the available choices.
Sizes Available
This product is presented as a configurable listing and may include multiple pack sizes or related options. Please select the required option from the variants shown on the page for current availability.